Federal Communications Commission (FCC) Nature Mandatory Requirements Standards EMC Factory Inspection Non-required Technical Information Voltage 120Vac Frequency 60Hz Plug U.S./Canada Specification NEMA 1-15P CSA CAN/CSA-22.2 No.21-95, NEMA 5-15P, NEMA 6-15P, NEMA 6-20P l FCC Certification FCC （The Federal Communications Commission (FCC) is an independent agency of the U.S. government, directly responsible to Congress, and the FCC's Division of Engineering and Technology is responsible for the Commission's technical support and equipment approval. According to the U.S. Federal Communications Regulations (CFR Part 47) provides that all electronic products entering the United States are required to carry out electromagnetic compatibility certification (some of the relevant provisions of the special provisions of the product, with the exception of), called FCC certification. l FCC certification methods According to the relevant part of the U.S. Federal Communications Act (CFR 47 part), where electronic products into the U.S. need to carry out electromagnetic compatibility certification (some of the relevant provisions of the special provisions of the product, except), which is more common in the certification of three kinds of certification methods: Certification (FCC ID certification), DoC ( self-proclaimed), Verification (self-certification). These three types of product certification methods and procedures have greater differences, different products can choose (Certificate) certification methods in the FCC has relevant provisions. The degree of strictness of its certification decreases。 Ⅰ, FCC Verification self-certification As long as the FCC accredited laboratory can issue such reports. Mainly for products including: AV products, corded phones, general household appliances, PC and PC peripherals other than digital devices, CASSA equipment. BORY certification cycle: one week Ⅱ, FCC DOC self-declaration Only the A2LA (American Association for Laboratory Accreditation) or NVLAP (U.S. National Laboratory Accreditation System) authorization of the accreditation of laboratories can issue such reports and DOC declaration. Only laboratories authorized and accredited by A2LA (American Association for Laboratory Accreditation) or NVLAP (National Laboratory Accreditation System) can issue such reports and DOC declaration. Only the laboratories authorized by A2LA (American Laboratory Accreditation Association) or NVLAP (National Laboratory Accreditation System) can issue such reports and DOC declarations. Main products: IT products, PC and PC peripherals. BORY Certification Period: 1-2 weeks III. FCC ID Certification The FCC reviews the samples (or photos) and test data submitted by the applicant, and authorizes an FCC ID number for the device if it meets the requirements of the FCC rules. Devices eligible for certification include low-power transmitters such as cordless telephones, remote controls for automatic doors, radio-controlled toys, and security alarm systems, Part 15 devices that intentionally emit radio-frequency energy, Part 18 industrial, scientific, and medical devices for mass consumer use, automatic variable frequency receivers and super-regenerative receivers, television interface devices, and home computers and their peripherals. The responsible party shall cause the equipment to be marked with the FCC ID: NOTE: If a device applies to two or three of the recognized categories, the responsible party shall choose.

FCC certification process

1, Declaration of Conformity The party responsible for the product (manufacturer or importer) will be the product in the FCC designated qualified testing organization (BORY) to test the product, make a test report, if the product meets the FCC standards, the product will be affixed with the appropriate labels, in the user's manual declaration of conformity with the provisions of the FCC standards, and retain the test report in case the FCC request.

2, apply for ID First apply for a FRN, used to fill out other forms. If the applicant is the first time to apply for the FCC ID, you need to apply for a permanent GranteeCode, waiting for the FCC to approve the applicant to distribute Grantee Code at the same time, the applicant should seize the time to test the equipment. The FCC should have approved the Grantee Code by the time all of the FCC-required materials have been prepared and the test report has been completed, and the applicant completes the FCC Form 731 and Form 159 online using the Code, the test report, and the required materials.Once the FCC receives the Form 159 and the remittance, the FCC will begin accepting applications for certification.The average time for the FCC to accept ID applications is 60 days. The average time for the FCC to process ID applications is 60 days. At the end of the processing, the FCC sends the OriginalGrant of the FCC ID to the applicant. The applicant will be able to sell or export the corresponding products after getting the certificate.

3、Data Preparation: To apply for FCC Verification, FCC DOC manufacturers only need to provide samples, circuit diagrams, series differences in the description (if any).

Information required for FCC ID application:

1. Sample

2. Service application form, (NS provides the format, filled out and signed by the applicant)

3. Authorization letter (NS provides the format, filled out and signed by the applicant): Project and certificationAuthorization Letter Certification Agreement FCC Authorization Letter Confidential Letter (  HFSS, DSSS, UNPS, GSM, CDMA and so on, if it is HFSS mode, to write out the principle C. Antenna Specification: products with external antenna (such as walkie-talkie) to give the antenna parameters (Antenna Gain) D. Output Power (the actual measured output power and the customer's nominal allowable) D. Output Power (the actual measured output power is allowed to have 5% deviation from the customer's nominal power, otherwise Fail)

5. Use Manual (instruction manual) Note that to add a warning word

6. Chematics (circuit diagrams) E. Wiring diagrams: to indicate the parameters of the components, to be labeled with the antenna F. Component location map 7. block Diagram (block diagram) to have an antenna, and labeled with frequency

8. Circuit Description describes the circuit diagram/schematic in words.

9. Turn up procedure (frequency modulation: explain how to adjust the frequency to the appropriate frequency point) Note: Low frequency wireless products do not need to provide this information Involving sound products (such as microphones, walkie-talkies) to provide LPF (Low Pass Filter) input and output points All Licence products should provide a "bandwidth". All Licence products must provide the "bandwidth" parameter.